MILLING SERVICES

Midwest Asphalt Maintenance, Inc. also offers as asphalt milling services to the wide selection of other services. Milling of asphalt can greatly reduce maintenance costs in your asphalt rehabilitation. Milling of deteriorated asphalt is recommended when your asphalt is thicker than 4.00" inches or if you have cracks in excess 2.00" inches in width. This process will save time and money over the high cost of the removal of the thick asphalt and cracks are repaired better than with a hot pour rubber.

We also provide milling of asphalt at cement and drain castings prior to resurfacing to ensure appropriate depth at these areas as to eliminate future problems caused by an insufficient depth of asphalt. If you do not mill these areas, flaking will occur over time because of the new material being to thin.

Milling of entire parking areas is recommended when time is of the essence. A 100,000 square foot parking area can be milled and removed from site in one (1) day, graded and compacted the 2nd day, base mix applied the 3rd day and final top layer applied with parking stalls installed on 4th day while keeping the normal flow of traffic moving to the business. This makes it a very cost effective process for the property owners faced with having to remove deteriorated asphalt lots.